skip to main text

Saving Received Faxes Automatically on USB Flash Drive

You can save received faxes on a USB flash drive as PDF files automatically when receiving a fax.

This section describes the procedure to enable the printer to save received faxes on a USB flash drive automatically.

Important

  • Do not remove the USB flash drive from the printer when the printer is set to save received faxes on a USB flash drive automatically.

  • For safety reasons, we recommend backing up faxes saved on a USB flash drive to another media periodically to avoid unexpected accidents.

  • We assume no responsibility for damage to or loss of data for whatever reason even within the warranty period.

  • Awaiting document processing. is displayed on the Fax standby screen and the faxes are stored in the printer's memory when the received faxes are not saved on the USB flash drive because the USB flash drive is not inserted or because it is not writable.

    You can save the faxes stored in the printer's memory to the USB flash drive manually. Delete the unnecessary fax from printer's memory after saving to the USB flash drive.

  1. Check that printer is turned on.

  2. Insert a USB flash drive.

  3. Select Setup on the HOME screen.

  4. Select Device settings.

  5. Select FAX settings.

  6. Select Auto save setting.

  7. Select ON.

  8. Select USB flash drive.

Note

  • You can save up to 250 pages of fax as one PDF file.

  • You can save up to 2000 PDF files on a USB flash drive.

  • If the USB flash drive is removed or becomes full while saving faxes is in progress, the error message is displayed on the touch screen. Select OK to dismiss the error.

  • The folder and file name of faxes saved on the USB flash drive is as follows:

    • Folder name: CANON_SC\FAXDOC\0001

    • File name (file extension: PDF): Running numbers, starting from FAX_0001

    • File date: The date and time of saving as set in the printer.

      For details on how to set the date and time:

  • When removing the USB flash drive, set Auto save setting to OFF.